Home Helping you growAboutProductsManufacturingNewsContact

Bromoxynil + MCPA


Product:

 

APVMA code: 67804/56899

Active Constituent(s):

200 g/L bromoxynil present as the octanoate

200 g/L MCPA present as the ethyl hexyl ester

solvent: 343 g/L liquid hydrocarbon 

Registered For:

 

 Commercial use

 Domestic use

Overview: For the control of broadleaf weeds in wheat, oats, barley, cereal rye, triticale, linseed, grass pastures and turf. 
Documents:

  MSDS  (135 KB)

  Label  ( 208 KB)


General Instructions

 

Before opening, carefully read Directions for Use, Precautionary and Protection Statements, Storage and Disposal, Safety Directions and First Aid Instructions.

 

Restraints

 

DO NOT spray if weeds are wilted by dry or cold weather or if crops are at a susceptible stage, or if rain is likely in 4 hours.

DO NOT apply if frosts are imminent.

DO NOT apply to diseased or frost-affected crops or turf.

 

Mixing

 

To ensure even mixing, half fill spray tank with clean water and add the required amount of this product. Agitate thoroughly, and then add the remainder of the water. Agitate again before spraying commences.

 

Application

 

DO NOT use rain-drop or air-induction nozzles, as coverage of weeds may not be adequate.

 

Boom Sprayer: Calibrate the machine before use to ensure that the correct application rate is obtained. Check height of boom above the crop to ensure that the spray is evenly distributed.

Cereals: Apply 50 to 200 litres of water per hectare. A minimum of 160 litres and preferably 200 litres of water per hectare is recommended where the weed infestation is heavy or the crop cover is dense or when tank-mixing with diclofop-methyl herbicide. Complete coverage of weeds is essential.

Linseed: Apply a minimum of 220 litres of water per hectare.

Turf: Apply a minimum of 500 litres of water per hectare.

Aerial Application: Apply a minimum of 22 litres of water per hectare or 30 litres of water per hectare if tank mixing with diclofop-methyl herbicide. Markers should always move upwind before aircraft passes overhead. Application by Micronair equipment may give variable results.

 

Equipment Maintenance

 

After use wash application equipment thoroughly with equipment cleaner and rinse with clean water several times.

 

Compatibility

 

This product is physically compatible in the spray tank with one of the following herbicides and insecticides in wheat and barley only: metsulfuron-methyl, dicamba, tralkoxydim, diclofop-methyl, MCPA, dimethoate, chlorpyrifos and omethoate. When mixed with metsulfuron or dicamba, do not apply to cereals undersown with lucerne. When mixed with diclofop-methyl, do not exceed 1.4Litres per hectare. Observe all instructions on the mixture partner label. As formulations of other manufacturer’s products are beyond the control of FMC Pty Ltd, all mixtures should be tested prior to mixing commercial quantities.

 

Resistant Weeds Warning

 

FMC Bromoxynil & MCPA Herbicide is a member of both the nitrile and phenoxy groups of herbicides. FMC Bromoxynil & MCPA Herbicide has both the inhibition of photosynthesis at Photosystem II and disruption of plant cell growth modes of action. For weeds resistance management FMC Bromoxynil & MCPA Herbicide, is a Group C and Group I herbicide. Some naturally occurring weed biotypes resistant to FMC Bromoxynil & MCPA Herbicide and other Group C and Group I herbicides may exist through normal genetic variability in any weed population. The resistant individuals can eventually dominate the weed population if these herbicides are used repeatedly. These resistant weeds will not be controlled by this product or Group C and Group I herbicides. Since the occurrence of resistant weeds is difficult to detect prior to use, FMC Crop Protection Pty Ltd accepts no liability for any losses that may result from the failure of FMC Bromoxynil & MCPA Herbicide to control resistant weeds.

 

Protection of Crops, Native and Other Non-Target Plants

 

DO NOT apply under weather conditions or from spraying equipment that may cause spray to drift onto nearby susceptible plants/crops, cropping lands or pastures. Avoid spray drift and vapour movement onto susceptible crops such as cotton, tobacco, tomatoes, vines, lupins, fruit trees and ornamentals.

DO NOT apply by misting machines.

NOTE: Maximum daily temperatures at or above 20şC at application, or on days following treatment, may result in seedling mortality and established plants may be damaged.

 

Protection of Wildlife, Fish, Crustaceans and Environment

 

Dangerous to fish. Do not contaminate streams, rivers or waterways with the chemical or used containers.

 

Protection of Livestock

 

Grazing Precaution

Sprayed weeds may become more palatable to stock and a higher intake of some weeds may result in stock poisoning and death from causes such as nitrate poisoning. Care should be taken especially where capeweed, Paterson’s Curse and variegated thistle predominate pasture. Avoid grazing with young or breeding stock. Do not graze horses or pigs on Paterson’s curse. If in doubt, contact your nearest Department of Agriculture.

 

Storage and Disposal 

 

(5L, 20L, 200L only)

Store in the closed, original container in a cool, well-ventilated area. Do not store for prolonged periods in direct sunlight. Triple or preferably pressure rinse containers before disposal. Add rinsings to the spray tank. Do not dispose of undiluted chemicals on site. If recycling, replace cap and return clean containers torecycler or designated collection point. If not recycling, break, crush or puncture and deliver empty packaging for appropriate disposal to an approved waste management facility. If an approved waste management facility is not available, bury the empty packaging 500 mm below the surface in a disposal pit specifically marked and set up for this purpose clear of waterways, desirable vegetation and tree roots, in compliance with relevant Local, State or Territory government regulations. DO NOT burn empty containers or product.

 

For refillable containers (1000L only)

Store the closed original container in a cool, well-ventilated area. Do not store for prolonged periods in direct sunlight. Empty contents fully into application equipment. Close all valves and return to point of supply for refill or storage.

 

110L Mini Bulk Returnable Container

Store the original sealed 110L container in a cool, well-ventilated area. Do not store for prolonged periods in direct sunlight. Do not tamper with the MicroMatic valve or the security seal. Do not contaminate the container with water or any other foreign matter. After each use of the product ensure the MicroMatic coupler, delivery system and hoses are disconnected, triple rinsed with clean water and drained accordingly. When the contents of the 110L container have been used, please return the empty container to the point of purchase. The 110L container remains the property of FMC Crop Protection Pty Ltd

 

Safety Directions

 

Product is poisonous if inhaled or swallowed. Attacks the eyes and will irritate the skin. Avoid contact with eyes and skin. Do not inhale vapour or spray mist. When preparing the spray and using the prepared spray wear cotton overalls buttoned to the neck and wrist, a washable hat and elbow length PVC gloves and face shield or goggles. If product in eyes, wash it out immediately with water. After use and before eating, drinking or smoking, wash hands, arms and face thoroughly with soap and water. After each day’s use, wash gloves, face shield or goggles and contaminated clothing.

 

DISCLAIMER: This is not the BROMOXYNIL + MCPA label. To view or print the label for this product, click the "MSDS/Label" tab at the top of this page. Always follow label instructions.

 

For specialist advice in an EMERGENCY only phone 1800 033 111, TOLL-FREE, ALL-HOURS, NATIONWIDE


To the topTo the top
Alphabetical index  Ι  Sitemap  Ι  Disclaimer  Ι  Sales terms and conditions  Ι  Useful links